pipe and duct soundproofing
Pipe And Duct Lagging Installed
pipe and duct lagging for soundproofing
Pipe And Duct Lag Rolls
pipe and duct noise barrier
B-10 LAG / QFA-3 Cut Away View
duct noise barrier on pipe
Lagging Used On Pipe

Acoustic Pipe and Duct Wrap

Sound Seal's Industrial Division HVAC duct lagging product line is designed to offer significant reduction of radiated noise from HVAC duct casings. The lagging can be applied to rectangular or round duct and pipe systems.

Industrial Pipe & Duct Wraps are mass loaded noise barriers with a reinforced foil facing on one side that allows for installation of matching lag tape.

Pipe & Duct Wrap Lag is available with a 1" or 2" quilted fiberglass decoupler. Standard rolls are 54" wide x 30' long. Typically used to wrap noisy pipes and ducts to block the noise that transmits through the walls of the pipe or duct as air or other contents move through it as well as to increase the sound absorption in the cavity. It also provides sound absorption and thermal insulation around the pipe or ductwork. The 2" thick quilted fiberglass absorber improves low frequency acoustical performance.

Contact Us Today

Pipe and Duct Products

hvac noise control lagging

Lag Pipe and Duct Wrap

Sound Seal's Pipe and Duct Wrap is a flexible 1 lb or 2 lb per square foot reinforced foil-faced faced mass loaded vinyl noise barrier. It is typically used to wrap noisy pipes and ducts to block the noise that transmits through the walls of the pipe or duct as air or other contents move through it as well as to increase the sound absorption in the cavity. The reinforced foil-faced exterior serves as a protective jacket for indoor or outdoor applications.

Data Sheets:
B-10 Lag
B-20 Lag

3-Part Spec Sheets:
B-10 Lag
B-20 Lag

hvac noise control duct wrapping

Lag Pipe and Duct Wrap With Acoustic Insulation

Sound Seal's Pipe and Duct Wrap Acoustic Insulation is the solution for noise control and Sound proofing of noisy pipes and duct works. Sound Seal Pipe and Duct Wrap or Lagging consists of a mass loaded noise barrier with reinforced foil facing on one side bonded to a 1" or 2" sound absorbing quilted fiberglass decoupler respectively.

Data Sheets:
B-10 Lag QFA/3
B-10 Lag QFA/9
B-20 Lag QFA/3
B-20 Lag QFA/9

3-Part Spec Sheets:
B-10 Lag QFA/3
B-10 Lag QFA/9
B-20 Lag QFA/3
B-20 Lag QFA/9

alumalag for hvac noise control

Outdoor Lag Pipe and Duct Wrap With Aluminum Jacket

AlumaLAG™ is an acoustic composite combining a noise barrier bonded to a rugged aluminum jacket. Designed specifically to meet varied acoustic performance needs, AlumaLAG™ products offer versatile solutions for all pipe and duct noise control problems. They are available in smooth, corrugated and embossed jacket finishes over a 1.0 lb or 2.0 lb / sq loaded vinyl barrier offering aesthetics, protection and durability for exterior and chemical resistant applications.

Typically used in conjunction with a fiberglass or mineral wool decoupler, AlumaLAG™ is a simple and effective solution when both sound blocking capability and extreme durability are requirements for a pipe or duct noise control project.

AlumaLag-10-032
AlumaLag-10-16
AlumaLag-20-16
AlumaLag-20-032

Sell Sheet

Need Help? Guaranteed Support: Click Here

Sound Seal, a leading manufacturer of noise control products serving the industrial, architectural, commercial and construction industries, announced today that they have acquired Flemington, New Jersey based Acoustical & Tackable Surfaces Inc (ATS).