|
Standard
Wood Ceilings |
|
|
|
View
Standard Ceiling Detail |
View
Standard Perforation Options |
WoodTrends Standard Wood Ceilings are linear wood plank
style ceiling treatment utilizing either perforations or
grooves to achieve NRC values as high as .90. Standard
Wood Ceiling Panels are manufactured on either an MDF or
chipboard core, using real wood veneer, finished with
two coats of a UV-Polyacrylate lacquer. Twenty-four
standard and forty custom veneers are available.
Installation is by pivot clip onto typical 15/16”
T-grid. A REVEAL EDGE detail leaves a 10 mm groove
running between planks. This groove is typically filled
with a real wood strip (provided) to hide the pivot
clip. A FLUSH EDGE detail requires no wood strip as the
edges butt together. A 2 mm bevel typically defines the
seam between planks. |
Reveal Edge
Optional real wood strip to hide pivot clip
Melamine MDF Strip used to hide
pivot clip
Edge banded to match veneer
5mm, 10 mm or 20mm groove
between planks
Planks available in sizes:
4.5", 7.5", 9.4" 11.4" by 95",
109"& 119"
long
Custom sizes available
|
Flush Edge
No visible wood strip between planks
No need for finished edges
2 mm bevel defines seam
between planks
Planks available in sizes:
4.5", 7.5", 9.4" 11.4" by 95"
109"& 119"
long
Custom sizes available
|
Other
Class A fire-rated composites available
NRC
values as high as .85
(see acoustics page)
|
|
|
|
 |
|
|
