Sound Seal's Industrial Division HVAC duct lagging product line is
designed to offer significant reduction of radiated noise from HVAC duct casings. The lagging can be applied to rectangular or round duct and pipe systems.Industrial Pipe & Duct Wraps are mass loaded noise barriers with a reinforced foil facing on one side that allows for installation of matching lag tape. Pipe & Duct Wrap Lag is available with a 1" or 2" quilted fiberglass decoupler. Standard rolls are 54'' wide x 30' long. Typically used to wrap noisy pipes and ducts to block the noise that transmits through the walls of the pipe or duct as air or other contents move through it as well as to increase the sound absorption in the cavity. It also provides sound absorption and thermal insulation around the pipe or ductwork. The 2" thick quilted fiberglass absorber improves low frequency acoustical performance.
Lag Pipe and Duct Wrap
Sound Seal's Pipe and Duct Wrap is a flexible 1 lb or 2 lb per square foot reinforced foil-faced faced mass loaded vinyl noise barrier. It is typically used to wrap noisy pipes and ducts to block the noise that transmits through the walls of the pipe or duct as air or other contents move through it as well as to increase the sound absorption in the cavity.
Lag Pipe and Duct Wrap With Acoustic Insulation
Sound Seal's Pipe and Duct Wrap Acoustic Insulation is the solution for noise control and Sound proofing of noisy pipes and duct works. Sound Seal Pipe and Duct Wrap or Lagging consists of a mass loaded noise barrier with reinforced foil facing on one side bonded to a 1" or 2" sound absorbing quilted fiberglass decoupler respectively.
Outdoor Lag Pipe and Duct Wrap With Aluminum Jacket
AlumaLAG™ is an acoustic composite combining a noise barrier bonded to a rugged aluminum jacket. Designed specifically to meet varied acoustic performance needs, AlumaLAG™ products offer versatile solutions for all pipe and duct noise control problems.
Pipe and Duct Brochure